|
Specifications |
MSB3000 |
MSB3001 |
MSB3002 |
MSB3003 |
User-defined |
|
The Main Parameters |
|
|
Size |
70mm×96mm×45mm |
|
Weight |
400g |
|
Optical Parameters |
|
|
Focal Length |
42mm input; 68mm output |
|
Slit the Incident |
100μ |
50μm |
150μm |
100μm |
30-200μm(optional) |
|
Grating |
600L/mm |
450/600/1200L/mm |
|
Filter |
Integration Filter(250-850nm,non-standard) |
|
Fiber Connection |
SMA905 relay to 0.22NA fiber |
|
Spectrum Parameters |
|
|
Wavelength Range |
340-950nm |
400-1100nm |
700-1100nm |
220-800nm |
200-1100nm(optional) |
|
Blazed Wavelength |
340nm |
450nm |
1000nm |
250nm |
- |
|
Bandwidth Spectrum |
4nm |
2nm |
5nm |
4nm |
- |
|
Wavelength Accuracy |
±1nm |
|
Wavelength Repeatability |
＜0.1nm |
|
Noise |
0.003Abs |
|
Stray Light |
0.3%(500nm) |
|
Integration Time |
5ms-65s |
|
Electrical Parameters |
|
|
Energy Consumption |
250mA@ 5 VDC |
|
Data Transfer Rate |
40Mbps(USB2.0) |
|
DAC Resolution |
16bit |
|
Interface |
USB2.0 RS232 |
|
|
|
|
Detector Parameter |
Sony ILX511 OR Toshiba TCD 1304AP and Hamamatsu |
|
Detection Range |
S9840 |
|
Pixels |
220_1100 nm( Hamamatsu S9840) |
|
Pixel Size |
1024PIXELS,3648(tOSHIBA TCD1304AP) |
|
Signal to Noise Ratio |
14µm×200µm |
|
DAC Resolution |
500 : 1(at full signal) |
|
Linear Calibration Value |
12 bit |
Flexible configuration: According to the band range of users ,the different requirements of the resolution,flexible configuration and slit grating.
Optional Items:
Slit the incident: the incident is the slit width,the smaller the value,about the high-resolution spectrometer,but the lower the energy system,poor signal to noise ratio.
Grating:the greater the grating groove density,the greater the grating dispersion,the higher the resolution,but under the same conditions,the smaller the scope of the band.
Receiver:Sony ILX511(2048 pixels) and Toshiba TCD1304AP(3648 pixels) for visible light receiver,in response to the spectrum of 340~1100nm,Hamamatsu S9840(1024 pixels) for the ultraviolet-visible receiver,in response to the spectrum of 200~1100nm.
More conventional form for the model configurations,such as the user has any other special requirements,please contact the local sales agent,or to contact our company.
Fiber-optic components:
It is a kind of optical fiber for optical signal transmission medium for the dissemination of material,which is the main mechanism into the core of the signal light,clad interface reflection after the completion of the optical signal in the core of communcation,in order to achieve data transmission.The optical signal attenuation small,strong toughness,strength,good temperature stability; tp provide a variety joint reflection projection type of measurement to meet the diverse needs of customers;SM905 standard interface to connect to a variety of measurement components, to complete a variety of different types of measurement.
|
Fiber Type |
Quartz,glass plastic optional |
|
Measurement Range |
220nm~1100nm |
|
NA |
0.22 |
|
Fiber Diameter |
100,200,400,500,600,1000µm |
|
Fiber Length |
2m(Or by user request) |
|
Bend Radius |
>0.3m |
|
Core |
Pure Silicon |
|
Paper Material |
PVC,PVC+Metal Spiral Pipe |
|
Operating Temperature |
-40~+75℃ |